THINKCAR Thinkscan Plus S7 OBD2 car diagnostic kit [Read and clear codes, 28 reset services, ABS, SRS, DPF, SAS, BCM, AirBag, TPMS...].

Thinkscan Plus S7 OBD2 is a top-of-the-range diagnostic tool for motor vehicles. It supports 7 different systems, including ECM, TCM, ABS, SRS, BCM, AC and IC. With 5 free additional lifetime resets, among 28 functions, it offers optimal use. This full-featured OBD2 scanner can perform diagnostics, read and erase codes, as well as provide information on data flow, I/M readiness, O2 sensor and DTC codes.

THINKCAR's Thinkscan Plus S7 is easily updated at the click of a button and supports multiple languages for international use. It is compatible with over 120 car models and is portable thanks to its 5-inch touch screen with TFT (IPS) technology.

This automotive scanner has advanced features such as hot key battery voltage monitoring, the ability to save and share screenshots via QR and print diagnostic reports. It is equipped with a C-type data cable for exporting information such as photos, videos and reports.

Thinkscan Plus S7 is ideal for servicing your vehicle, allowing you to look out for fault codes and reset ABS, SRS, DPF and SAS systems. It's a great option for automotive professionals, allowing them to view codes, monitor sensors and reset airbags.

Full OBDII diagnostic functions with THINKSCAN Plus S7 :

• Quick readout of current, pending and persistent OBD fault codes.
• Foolproof deletion of detected fault codes and extinction of the check engine light.
• Easy analysis thanks to real-time graphical display of vehicle data.
• Instant display of vehicle activity parameters when a DTC is detected.
• I/M readiness to pass state emissions compliance inspection.
• O2 sensor test to check the efficiency of the vehicle's fuel consumption and emissions.
• Reading the results of integrated diagnostic monitoring tests for specific components/systems.
• Full recovery of vehicle information, such as VIN, CINs and CVNs.
• Component testing to start a leak test for the vehicle's EVAP system.

7 Diagnostic and reset functions included for life :

• Engine system diagnostics

  • Our automotive OBD2 scanner can diagnose and clear engine system fault codes. It supports all 10 OBDII test modes such as real-time data, O2 sensor test, component check, etc. With this scanner, you can precisely identify the source of the problem and turn off the MIL engine fault light.

• TCM system diagnostics

  • After examining the transmission system, this scanner can determine anomalies by reading codes and monitor the state of health by displaying information in real time. It can also turn off the warning light to ensure that the right amount of power is sent to the wheels.

• ABS system diagnostics

  • This scanner can identify ABS faults by retrieving error codes and determining the source of the problem. It is therefore a valuable aid in pinpointing the cause of an ABS malfunction.

• Diagnosis of the SRS system

  • The restraint safety system consists of impact sensors, a control module and airbags. This scanner can monitor electronic parameters to assess the condition of each component.

• BCM system diagnostics

• • The vehicle's control module plays a crucial role in maintaining control of its various functions. This scanner can detect anomalies in this system and identify their source. It can also monitor the body's electrical equipment, such as headlights, windscreen wipers, door locks, electric windows, sunroofs and so on.

• AC system diagnostics

  • The air conditioning system can be controlled to meet the requirements of the production process and improve indoor climate conditions. This scanner can diagnose problems in this system.

• IC system diagnostics

  • The instrument system can detect the cause of the fault and extinguish the fault light. This scanner can diagnose it.

A diagnostic tool with 28 possible reset services:

THINKSCAN Plus S7 offers 28 vehicle maintenance services, including the option to select 5 free resets for life. Additional services can be purchased at an annual cost of $ 29.95 per reset.

• Resetting the oil lamp

  • The oil sight glass reset service allows you to determine the remaining life of the engine oil system once the oil has been replaced.

• Resetting the EPB parking brake

  • The process of resetting the electronic parking brake is important to ensure the safety and efficiency of the braking system.

• BAT Battery Service

  • The BAT service allows you to monitor battery performance, record replacements and check the vehicle's standby state.

• Resetting the DPF Diesel Particulate Filter

  • The service targets diesel particulate filter systems and includes the installation of new DPF components, DPF regeneration and DPF adjustment following engine control replacement.

• Resetting the SAS Steering Angle Sensor

  • Resetting the SAS (steering angle sensor) cleans the memories of faulty sensors and is crucial for sensor calibration.

• Resetting the TPMS system

  • Resetting the TPMS (tyre pressure monitoring system) allows you to display sensor IDs from the ECU, enter replacement TPMS sensor IDs and check the sensors.

• Programming IMMO Keys

  • IMMO key programming allows you to deactivate lost car keys and add a new replacement key, with a PIN code reading function.

• ABS Reset

  • ABS brake reset provides a solid brake pad after bleeding the ABS pump system following a repair.

• Resetting the sunroof

  • When the sunroof control has communication difficulties or is replaced, a reset is necessary for optimum operation of the sunroof.

• Resetting the suspension

  • If the electronic air suspension with massage system is not working properly, a reset may be necessary. Simply close all the car doors to start the procedure.

• Resetting the gearbox

  • To optimise the transmission's capabilities, it is recommended that you follow the steps for resetting the transmission's adaptive learning. The vehicle must be started and driven so that the engine control and the transmission control work in a coordinated way by monitoring the driving style.

• Resetting AFS headlights

  • The adaptive front lighting system (AFS) is capable of swivelling to match the steering wheel. To keep the headlights upright, simply press a button.

• Injector coding

  • Injector coding can reveal problems with the injectors. It can detect leaking or malfunctioning injectors, as well as other problems with the ignition system and mechanical components.

• Adapting the butterfly body

  • The throttle body is crucial for controlling the amount of air entering the engine. If this component is cleaned or repaired, it is essential to reset the throttle sensor position for optimum performance.

• Learning speed

  • The scan tool is used to monitor the signals from the camshaft position sensors to determine whether conditions are favourable for continued engine operation.

• EGR reset

  • The purpose of the EGR reset is to reduce nitrogen oxides (NOx) in the exhaust gases while improving fuel economy at part-load.

• Resetting the air/fuel ratio

  • The A/F reset is used to set or learn the air/fuel ratio parameters.

• Resetting the Adblue filter

  • After replacing or refilling the diesel exhaust treatment fluid (car urea), it is necessary to carry out a urea reset.

• Resetting the airbag

  • Resetting the airbag clears the airbag collision fault indicator by resetting the corresponding data.

• Bleeding the coolant

  • This function activates the electronic water pump before circulating the air in the cooling system to avoid any problems.

• Learning the system

  • The transmission's self-learning procedure can improve its performance. If the gearbox is dismantled or repaired, causing gear change problems, this function is necessary to adjust the transmission to the driving conditions for greater comfort and optimum gear change performance.

• Language change

  • This function is used to change the language used on the vehicle's central control system.

• Resetting the Nox sensor

  • The Nox sensor is used to detect levels of nitrogen oxides (Nox) in the exhaust gases. After resetting the Nox fault and replacing the Nox catalytic converter, it is necessary to reset the values stored in the engine ECU.

• ODO reset

  • Resetting the odometer involves updating the mileage value stored on the odometer chip using a diagnostic computer and data cable. This ensures that the odometer always reflects the actual mileage. In the event of a speed sensor failure or odometer malfunction, an ODO reset is often required to bring the odometer reading back up to date after servicing.

• Resetting the STOP/START function

  • The automatic on/off function can be activated or deactivated via the ECU's hidden settings if the vehicle has this capability and is compatible with the equipment.

• Seat calibration

  • This feature is used to match seats with memory functions, in the event of replacement or repair.

• Mode of transport

  • To optimise energy consumption, certain functions can be deactivated, such as limiting the vehicle speed, deactivating door opening and the remote control key. To cancel these settings, the transport mode must be deactivated to restore the vehicle to its normal state.

• Window calibration

  • The aim of this function is to match the door windows by recovering the initial memory of the ECU and restoring the automatic up and down function of the electric window.

Compatible with almost all vehicles on the market

THINKCAR offers worldwide coverage to ensure the compatibility of your fleet with the most reliable and popular brands, such as Audi, Benz, BMW, Chrysler, Citroen, Dacia, Daewoo, Fiat, GM, Holden, Honda, Hyundai, Jaguar, Jpisuzu, Kia, Land Rover, Mahindra, Maruti, Mazda, Mini, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Saab, Seat, Skoda, Smart, Sprinter, Subaru, Suzuki, Tata, Toyota, USAFord, Volvo and Volkswagen. Contact our customer service department for information on the cover options available.

Package contents :

• 1 Thinkscan Plus S7 diagnostic case
• 1 Diagnostic dongle
• 1 Charging cable
• 1 Mains adapter

Note that all the items on this list of car diagnostic equipment are designed for practical and effective use. With the Thinkscan Plus S7 host, you'll have a reliable tool for diagnosing your vehicle's problems. The supplied diagnostic dongle will allow you to connect the host to your car, while the charging cable and mains adapter will ensure a constant power supply for uninterrupted operation.